You'll find more details of the products below, For Those who only need a soupcon of technical information. If you'd like more of the story  please click the appropriate image below to visit the designers website.

Please contact us for more details on pricing, and current lead times for orders.


Bergmann

Magne

Turntable - Airbearing design + puck - DC motor. Beltdriven.
Plinth - Solid high-density composite material.
Platter/Bearing Aluminium platter/Polycarbonate mat  air bearing.
Centred by steel spindel/hardweared low friction polymer bearing.
Dimensions - 440 x 495 x 165 (D x W x H)
Total weight - 18,5 kg.
Tonearm - Linear tracking airbearing tonearm - Adjustments: VTA, overhang, leveling. Effective mass: 11g.
Connectors - RCA, XLR, DIN.
Powersupply - Seperate plug-in power supply. 33 & 45 rpm. Speed finetuning.
Airsupply - Silent, clean, dry and smooth airflow. Replaceable filter.
Dimensions - 330 x 150 x 160 (D x W x H) Weight - 8kg.

Sindre

Turntable - Airbearing design + clamp - DC motor. Beltdriven.
Plinth - 4 layers of solid high-density composite material.
Platter/Bearing - Acrylic platter and the aluminum subplatter floats on air.
Centred by steel spindel/hardweared low friction polymer bearing.
Dimensions - 440 x 495 x 210 (D x W x H)
Total weight - 23 kg.
Tonearm - Linear tracking airbearing tonearm. Adjustments: VTA, overhang, leveling.
Connectors - RCA, XLR, DIN.
Effective mass - 10 gr.
Power supply - Stable and powerful seperate supply. 33 & 45 rpm. Speed finetuning.
Dimensions - 363 x 210 x 93 (D x W x H) Weight - 3.6 kg.
Airsupply - Silent, clean, dry and smooth airflow. Replaceable dust filter.
Dimensions - 415 x 210 x 220 (D x W x H) Weight - 8.4 kg.

 

Sleipner

Turntable - Airbearing design. Vacuum hold down or clamp. High precision digital controlled DC motor. Beltdriven.

Plinth - Outer layer in 12mm Polyvinyl. Painted and handpolished.
Inner part is a 6 layer sandwich construction, in different materials for optimum resonance control.
Platter/Bearing- Aluminium platter supported and centred by air.
Bearing/airsupply creates a thin airfilm, both vertical and horizontal, between platter and bearing - no mechanical noise - no friction.
Dimensions - 440 x 495 x 230 (D x W x H).
Total weight - 39.8 kg.
Tonearm -Linear tracking airbearing Tonearm. Adjustments: VTA, overhang, leveling. Wire - internal wire in pure silver. Clips - Silver plated copper.
Connectors - ACR, XLR, DIN.
Effective mass - 11 gr.
Motorcontrol - High precision digital controlled DC motor, with hallsensor and encoder.
Supported by a very stable and oversized power supply. 33 & 45rpm. Finetuning by microprocessor controlled pushbuttons. Dimensions - 440 x 99 x 105 (D x W x H) Weight - 3.6 kg.
Airsupply - Lowpressure design. Dimensions - 440 x 226 x 232 (D x W x H) Weight - 17.2 kg.

 

 


WOLF VON LANGA

SON

Frequency response: 25 - 30,000 Hz
Drive units: 1 x Wolf von Langa A1200S, 1 x Wolf von Langa AMT
Efficiency: 95 dB / 1 W / 1m
Power handling: 150 W sinus
Dimensions: W 404 x H 874 x D 330 mm
Color: Ultra gloss black and white Piano finish. Special order all RAL colors
Weight: 42 kg each

 


einstein

The Preamplifier

Signal to Noise Ration typ. 100 db
Distortion @ 1 kHz < 0.01
Output Voltage bal. 2.5 Volt to 100 Ohmmax.
Input Voltage 7 Volt
Output Impedance 50 Ohm
Bandwidth 7 Hz untill 400 kHz
Channel Separation > 98 db
Weight 21 kg
Dimensions (H x L x D) 20 cm x 43 cm x 41 cm

Final Cut (OTL Monoblock)

Signal to Noise Ration typ. 96 db
Distortion @ 1 kHz < 0.03%
Output 60 Watt/8Ohm (40 Watt/4Ohm)
Damping 80/8 Ohm
Weight 29 kg
Dimensions (H x L x D) 24 cm x 43 cm x 39 cm

The Tune (Integrated)

Output 130W, power 80 W, 8 ohm / 4 ohm
Signal to Noise - line better 95 dB / Phono MM better 70 dB
USB 95 dB / SPDIF 95 dB
Touchsreen control and remote control
Switchable preamp output
Massive base and back panel made of aluminium
Dimensions 43 x 40.5 x 13 cm

 

The Pickup (Moving Coil)

Stylus Shibata
Frequency response 20-30kHz
Output voltage 0.4mV at 5cm/sek
Tracking force 2.3g +/- .1g
Loading 150-300ohm
Weight 13g

The Octopus

High-quality, stable housing design with V2A
Internal wiring 2mm ² high-purity copper plated with high quality Teflon coating
Power input for full amperage 16A, lockable, with switch completely disconnected from the mains
Phase detection - Overvoltage protection with failure indication - Voltage Display
Red slots filtered and fused separately to 6A loads
DC voltage display (DC Detect)
Dimensions 39 x 15 x 9 cm

 


audiomachina

Compact Reference Monitor (CRM)

Type: 2-way sealed-box reference mini-monitor
Construction: Full SSA (Solid Slab Aluminum)
Frequency Response: 45-20kHz
Sensitivity: 84dB @ 8 Ohms, benign phase
Drivers: 6″ (15cm) mid-bass, 1″ (2.5cm) tweeter
Crossover: Purist, Ti technology, 3kHz
Dimensions: 12″H x 8″W x 6″D (30 x 20 x 15 cm)
Weight: 27 lbs (12kg) each
Recommended Amplifier: 20-100 WPC @ 8 Ohms

Compact Reference Subwoofer (CRS)

Type: Active powered reference subwoofer
Construction: Full SSA (Solid Slab Aluminum)
Frequency Response: 15-100Hz
Driver: 10″ (26cm) ultra-long-throw subwoofer
Filter: 100% analog active filter, adjustable frequency/level
Amplifier: 500W ICEpower, internal
Dimensions: 14″H x 12″W x 6″D (35 x 30 x 15 cm)
Weight: 50 lbs (23kg) each.

Compact Reference Grand (CRG)

Type: 3-way sealed-box reference monitor
Construction: Full SSA (Solid Slab Aluminum), integrally machined midrange sub-enclosure
Frequency Response: 40-20kHz
Sensitivity: 86dB @ 4 Ohms, benign phase
Drivers: 7″ (18cm) bass, 4″ (11cm) midrange, 1″ (2.5cm) tweeter
Crossover: Purist, Ti technology, 200/5kHz
Dimensions: 20″H x 10″W x 6″D (50 x 25 x 15 cm)
Weight: 50 lbs (23kg) each
Recommended Amplifier: 20-100 WPC @ 8 Ohms

Maestro S

Type: 4-way sealed-box floorstanding reference loudspeaker
Construction: Full SSA (Solid Slab Aluminum), Modular MAPS system
Frequency Response: 15-30kHz
Sensitivity: 89dB @ 4 Ohms, benign phase
Drivers: 2×10″ (26cm) bass, 2×6″ (15cm) midbass, 4″ (12cm) midrange, 1″ (2.5cm) tweeter
Crossover: Subwoofer 100Hz, Purist midrange/tweeter, Ti technology, 800/3kHz
Subwoofer: Active self-contained, MSX filter, 1000W ICEpower amplifier
Controls: Subwoofer frequency/level, midrange & tweeter level, precision stepped
Dimensions: 52″H x 12″W x 12″D (130 x 30 x 30 cm)
Weight:  176 lbs (80kg) each, assembled
Recommended Amplifier: 100-500 WPC @ 4 Ohms

 



Call for more details